Skip to content

Soak in Style, Live in Luxury — Custom Bathtubs for Every Home.

Handcrafted Luxury Bathtubs, Designed Around You

🚚Free shipping to the Continental U.S. Curbside Delivery

Easy Care and Maintenance for Copper tubs

Maintenance Information for Copper Bathtubs:

The copper used for our copper bathtubs is pure Virgin Copper and has been treated with a clear varnish sealant, which provides extra protection to the patina and to the copper surface. Yet it is important to remember that even the strongest lacquer cannot take the place of responsible care and maintenance. Kindly note the maintenance information below to properly care for your copper bathtubs.

CLEANING
• For regular, simple cleaning, use mild NON-ACIDIC liquid detergent or soap and water and a very soft non-abrasive cotton cloth; other cleaners are not necessary. We recommend a PH-balanced liquid dish soap such as Ivory, avoiding harsh detergents such as Dawn/Palmolive, etc.
• For occasional deeper disinfecting, a non-abrasive, non-corrosive cleaner may be used, such as diluted Simple Green.
• Keep your tub clean and dry by wiping it down and removing all excess
water each time it is used with a soft cloth. After cleaning, be sure to dry the copper tub thoroughly to prevent water spots and streaks from forming on the surface.

MAINTENANCE
• The copper tubs need to be waxed approximately every 3-6 months depending on the frequency of use. Beeswax or Honey Wax products such as Flitz Fixture and Faucet Wax (available online at Flitz.com), are recommended. Apply wax lotion with a soft, clean cloth and buff with a clean, soft, non-abrasive cloth, referring to wax manufacturer's instructions.
• Note: Wax may be applied OVER clean, dry Lacquer finishes regularly to give tubs a rich look and to protect and extend the life of the lacquer sealant indefinitely.
• SCRATCHES: A surface scratch that penetrates the lacquer can cause the underlying copper to patina. A light application of KRYLON Clear Sealer can be used over a cleaned, dry tub to re-seal the scratched surface. Please refer to our Terms or Conditions for further warranty information regarding finishes.

DO NOT
• Do not use copper polish/cleaners, abrasive materials, acidic or abrasive cleaners (such as Comet/Soft Scrub) or harsh chemicals such as acetone – these will compromise the integrity of the Lacquer Finish and can ruin the surface of the copper bathtubs.
• Do not leave Acidic foods sitting on the surface of the tub for extended periods.

NOTE
• As copper is a natural metal, its patina will naturally change slightly with use, over time, and the copper bathtubs will develop a warmer, richer patina. The tubs will not turn green as the lacquer is protective.
• As all copper bathtubs are individually handcrafted and made-to-order, minor variations in patinas, textures, and dimensions of your copper bathtubs should be anticipated.